EN 10025-5 Cold rolled steels resistant to atmospheric corrosion
Supporting and cladding elements of outdoor surfaces exposed to weather conditions, production of containers suitable for sea transport.
The surface of the cold rolled sheet must be clean, with white, unpolished aspect being admitted some local marks of oxides:
The strips are delivered in annealed states, planed (cold hardened), covered with a fine coating of oil of protection easily washable. The strips, after a corresponding preparation, can be painted, galvanized, etc.
| Size W x l (mm) | Thickness (mm) | Weight (kg) |
|---|---|---|
| 1000x2000 | 0.4 | 6.40 |
| 1000x2000 | 0.5 | 8 |
| 1000x2000 | 0.6 | 9.6 |
| 1000x2000 | 0.8 | 12.80 |
| 1000x2000 | 1 | 16 |
| 1000x2000 | 1.25 | 20 |
| 1000x2000 | 1.5 | 24 |
| 1000x2000 | 2 | 32 |
| 1000x2000 | 2.5 | 40 |
| 1000x2000 | 3 | 48 |
| 1250x2500 | 0.8 | 20 |
| 1250x2500 | 1 | 25 |
| 1250x2500 | 1.25 | 31.25 |
| 1250x2500 | 1.5 | 37.5 |
| 1250x2500 | 2 | 50 |
| 1250x2500 | 2.5 | 62.5 |
| 1250x2500 | 3 | 75 |
| 1500x3000 | 1 | 36 |
| 1500x3000 | 1.25 | 45 |
| 1500x3000 | 1.5 | 54 |
| 1500x3000 | 2 | 72 |
| 1500x3000 | 2.5 | 90 |
| 1500x3000 | 3 | 108 |
| Standard | Steel grade | Minimum yield strength ReH N/mm2 | Tesile strength Rm N/mm2 | A (%) min. | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ≤16 | > 16≤ 40 | > 40≤ 60 | > 60≤ 100 | ≤16 | > 16≤ 40 | > 40≤ 60 | > 60≤ 100 | ≤16 | > 16≤ 40 | > 40≤ 60 | > 60≤ 100 | ||
| EN 10025-5 | S235J0W | 235 | 225 | 215 | 215 | 340-470 | 340-470 | 340-470 | 340-470 | 26 | 26 | 25 | 24 |
| S235J2W | 235 | 225 | 215 | 215 | 340-470 | 340-470 | 340-470 | 340-470 | 24 | 24 | 23 | 22 | |
| Standard | Steel grade | C % max. | Si % max. | Mn % | P % max. | S % max. | Al % min. | N % max. | Cr % | Cu % | Nb % | Ni % max. | Ti % | V % |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| EN 10025-5 | S235J0W | 0,13 | 0,4 | 0.20-0.60 | 0,04 | 0,04 | - | 0,009 | 0.40-0.80 | 0.25-0.55 | - | 0,65 | - | - |
| S235J2W | 0,16 | 0,5 | 0.50-1.50 | 0,03 | 0,03 | 0,02 | - | 0.40-0.80 | 0.25-0.55 | 0.015-0.06 | 0,65 | 0.02-0.1 | 0.02-0.12 |
Dimensiunea standard la care se livreaza aceste profile din aluminiu este de 6000 mm.
In the case of sheets you can buy whole pieces!
