Cold rolled steel sheet
Fields of use
Cold rolled unalloyed mild steels for conventional enamelling
Typical applications
Dishes, sinks, shower trays, boilers, kitchen stoves, gas convectors and other household appliances.
Cold rolled unalloyed mild steels for conventional enamelling
Dishes, sinks, shower trays, boilers, kitchen stoves, gas convectors and other household appliances.
The surface of the cold rolled sheet must be clean, with white, unpolished aspect being admitted some local marks of oxides:
The strips are delivered in annealed states, planed (cold hardened), covered with a fine coating of oil of protection easily washable. The strips, after a corresponding preparation, can be painted, galvanized, etc.
Size W x l (mm) | Thickness (mm) | Weight (kg) |
---|---|---|
1000x2000 | 0.4 | 6.40 |
1000x2000 | 0.5 | 8 |
1000x2000 | 0.6 | 9.6 |
1000x2000 | 0.8 | 12.80 |
1000x2000 | 1 | 16 |
1000x2000 | 1.25 | 20 |
1000x2000 | 1.5 | 24 |
1000x2000 | 2 | 32 |
1000x2000 | 2.5 | 40 |
1000x2000 | 3 | 48 |
1250x2500 | 0.8 | 20 |
1250x2500 | 1 | 25 |
1250x2500 | 1.25 | 31.25 |
1250x2500 | 1.5 | 37.5 |
1250x2500 | 2 | 50 |
1250x2500 | 2.5 | 62.5 |
1250x2500 | 3 | 75 |
1500x3000 | 1 | 36 |
1500x3000 | 1.25 | 45 |
1500x3000 | 1.5 | 54 |
1500x3000 | 2 | 72 |
1500x3000 | 2.5 | 90 |
1500x3000 | 3 | 108 |
Standard | Steel grade | Minimum yield strength ReH N/mm2 | Tesile strength Rm N/mm2 | A (%) min. | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
≤16 | > 16≤ 40 | > 40≤ 60 | > 60≤ 100 | ≤16 | > 16≤ 40 | > 40≤ 60 | > 60≤ 100 | ≤16 | > 16≤ 40 | > 40≤ 60 | > 60≤ 100 | ||
EN 10025-5 | S235J0W | 235 | 225 | 215 | 215 | 340-470 | 340-470 | 340-470 | 340-470 | 26 | 26 | 25 | 24 |
S235J2W | 235 | 225 | 215 | 215 | 340-470 | 340-470 | 340-470 | 340-470 | 24 | 24 | 23 | 22 |
Standard | Steel grade | C % max. | Si % max. | Mn % | P % max. | S % max. | Al % min. | N % max. | Cr % | Cu % | Nb % | Ni % max. | Ti % | V % |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
EN 10025-5 | S235J0W | 0,13 | 0,4 | 0.20-0.60 | 0,04 | 0,04 | - | 0,009 | 0.40-0.80 | 0.25-0.55 | - | 0,65 | - | - |
S235J2W | 0,16 | 0,5 | 0.50-1.50 | 0,03 | 0,03 | 0,02 | - | 0.40-0.80 | 0.25-0.55 | 0.015-0.06 | 0,65 | 0.02-0.1 | 0.02-0.12 |
The standard size at which these steel profiles are delivered is 6000 mm.
In the case of sheets you can buy whole pieces!