Hot rolled steel sheet

Hot rolled steel sheet EN 10025-3

Fields of use

 Fine-grained steels produced by normalising rolling

Typical applications

Welded structures, bridges, containers and water tanks exposed to high load at low ambient temperature.

Print

Hot rolled steel tables

Aspects

The surface of the strips must be clean and smooth, without any covers, cuttings, air holes, scratches, non-metallic and scale inclusions, lacks of material, superpositons and stratifications.

There are admitted the following defects of surface:
  • small local scratches and air holes, local exfoliations, inequalities resulted from rolling, in the limits of the deviations accepted in the case of the thickness
  • a thin layer of oxides
  • unevenness resulted from rolling or that remain after the falling of the scale, in the limits of the negative deviations to thickness
But, there is not admitted the correction by welding of the surface defects. There are not admitted, on the cut edges, any exfoliations and ruptures visible to the naked eye. The strips must have their edges cut in right angles

Delivery conditions

The sheet are delivered in rolled state or in normalized state obtained by the control of the temperature during and after rolling. The sheet with cut edge with the thickness to 40 mm are going to have their edges cut only by mechanical means, and those with the thickness over 40 mm are going to have their edges cut only by flame.

Size W x l (mm)Thickness (mm)Weight (kg)
1000 x 20001.524
1000 x 2000232
1000 x 20002.540
1000 x 2000348
1250 x 25001.537.5
1250 x 2500250
1250 x 25002.562.5
1250 x 2500375
1250 x 25004100
1250 x 25005125
1500 x 3000272
1500 x 30002.590
1500 x 30003108
1500 x 30004144
1500 x 30005180
1500 x 30006216
1500 x 30007252
1500 x 30008288
1500 x 300010360
1500 x 300012432
1500 x 60003216
1500 x 60004288
1500 x 60005360
1500 x 60006432
1500 x 60007504
1500 x 60008576
1500 x 600010720
1500 x 600012864
1500 x 6000151080
1500 x 6000201440
1500 x 6000251800
1500 x 6000302160
2000 x 6000151440
2000 x 6000201920
2000 x 6000252400
2000 x 6000302880

Mechanical properties

StandardSteel gradeMinimum yield stregth ReH N/mm2Tensile stregth Rm N/mm2A80 (%) min.
EN 10111DD 111.5 ≤ g < 2170 - 36044023
DD 121.5 ≤ g < 2170 - 34042025
DD 131.5 ≤ g < 2170 - 33040028
DD 141.5 ≤ g < 2170 - 31038031
DD 112 ≤ g < 11170 - 34044024
DD 122 ≤ g < 11170 - 32042026
DD 132 ≤ g < 11170 - 31040029
DD 142 ≤ g < 11170 - 29038032

Chemical composition 

StandardSteel gradeC % max.Mn % max.P % max.S % max.
EN 10111DD 110,120,600,0450,045
DD 120,100,450,0350,035
DD 130,080,400,0300,030
DD 140,080,350,0250,025
  • Available size 1000 x 1000 – 1500 x 6000 mm
  • Available thickness 1.5 – 12 mm
  • Steel class S275N, S275NL, S355N, S355NL, S420N, S420NL, S460N, S460NL

Lungimi de livrare
Profil si tevi

Dimensiunea standard la care se livreaza aceste profile din aluminiu este de 6000 mm.

Tabla

In the case of sheets you can buy whole pieces!

    Add new element

    Calculate Add

    Success Product was added to price quotation request.

    Clear filter
    0 kg Attach