Steel L profile

Steel L profile SE EN 10056

Fields of application

For construction scopes, metallic halls, various metallic constructions, fences, gates, poles, frames, frameworks, reinforcement or protection of various parts, machines, various aplications.


Steel L profile


The sides of the section must be perpedicular to each other.

Sections need to be straight, woithout bending of the axis. Local curves are allowed, with a maximum deviation of 4 mm/m. The sections must not be twisted around its' axis. Sections must be cut avoiding the bending of the edges and without visible deformation of the section. Burrs resulting from cutting must not exceed 8 mm.

Delivery conditions

The equal angles are delivered in rolled state, in free bars or in joints between 300-5000 kg.

Size (mm)Thickness (mm)Weight (kg/m)
20 x 2030.89
25 x 2531.12
30 x 3031.36
35 x 3542.09
40 x 4031.84
40 x 4042.42
45 x 4553.38
50 x 5043.06
50 x 5053.77
60 x 6054.58
60 x 6065.42
70 x 7077.38
80 x 8089.66
90 x 90912.2
100 x 1001015.1
120 x 1201221.6

Mechanical aspects

SE EN 10056StateThicknessRm N/mm2Rp 0,2A5 (%)Weldability

Chemical composition

StandardStateC %Mn %P %S %N %Cu %CEV %
SE EN 10056S235JRmax 20max 1.4max 0.04max 0.04max 0.012max 0.55max 0.38
  • Available size 20 x 20 mm - 120 x 120 mm
  • Available thickness 3 mm - 12 mm

Lungimi de livrare
Profil si tevi

The standard size at which these steel profiles are delivered is 6000 mm.


In the case of sheets you can buy whole pieces!

    Add new element

    Calculate Add

    Success Product was added to price quotation request.

    Clear filter
    0 m (0 kg) For the cutting of the products mark this box.