SE EN 10060
Round steel bars are used on a wide scale in the industry and everyday life, due to its' specific characteristics and utility. Using them as semifabricates results in numerous situation in a shortening of production times and costs (for examle in the production of screws).
The bars must be straight without bends of the axis; the deviation from rectilinearity should not surpass 0,25-0,4 % of the bar length.
The bars must be cut without the bending of the endings and without the strain of the section. The burrs resulting from the cutting must not surpass 8 mm.
A deviation from the round form of maximum 0,3-3 mm is allowed.
Round bars are delivered in rolled state, in bars or bundles between 300-3000 kg, with lengths of 3-6m.
| Diameter Ø (mm) | Weight (kg/m) |
|---|---|
| 4 | 0.10 |
| 5 | 0.15 |
| 6 | 0.22 |
| 8 | 0.39 |
| 10 | 0.62 |
| 12 | 0.89 |
| 13 | 1.05 |
| 14 | 1.21 |
| 15 | 1.39 |
| 16 | 1.58 |
| 18 | 2 |
| 19 | 2.23 |
| 20 | 2.47 |
| 22 | 2.98 |
| 24 | 3.55 |
| 25 | 3.85 |
| 30 | 5.5 |
| 40 | 9.86 |
| 50 | 15.41 |
| 60 | 22.18 |
| 70 | 30.2 |
| 80 | 39.44 |
| 90 | 49.91 |
| 100 | 61.62 |
| SE EN 10060 | State | Thickness | Rm N/mm2 | Rp 0,2 | A5 (%) | Weldability |
|---|---|---|---|---|---|---|
| S235JR | <16 | 360-510 | 235 | 26 | excellent | |
| 16-40 | 360-510 | 225 | 26 | excellent | ||
| 40-63 | 360-510 | 215 | 25 | excellent | ||
| 63-80 | 360-510 | 215 | 24 | excellent | ||
| 80-100 | 360-510 | 215 | 24 | excellent | ||
| 100-125 | 350-500 | 195 | 22 | excellent |
| Standard | State | C % | Mn % | P % | S % | N % | Cu % | CEV % |
|---|---|---|---|---|---|---|---|---|
| SE EN 10060 | S235JR | max 20 | max 1.4 | max 0.04 | max 0.04 | max 0.012 | max 0.55 | max 0.38 |
The standard size at which these steel profiles are delivered is 6000 mm.
In the case of sheets you can buy whole pieces!
