SR EN 10219-2 Contruction pipes are used for building fence poles, scaffolds, metallic frames, reinforcements, support structures, various metallic structures and fabricates, desingelements.
Construction pipes are not used for transporting any kind of fluids.
The exterior and interior surfaces of the pipe must be smooth, without fissures, cracks, overlay of materials, non-metallic inclusions. Small scratches, bumps, dents, a thin layer of welding cinder or traces after clearing defects resulting from the production process are allowed, avoiding wall thickness to fall under the minimal allowed limits. The welding seam needs to be compact and continuous, without fissures or other defects that reduce the rezistence of the seam under the rezistence of the base metal.
The exterior ledge of the welding seam is removed. Thickening of the seam within the range of permitted diameter limits is allowed. The interior burr of the welding seam is not removed. Unevenness on the margins of the metal strip in the welding seam is not allowed. Extremities of the pipe must be cut perpendicularly on its' axis. A burr on the pipe ends resulting from the tehnologic process of cutting is allowed. Deformation of pipe ends is not allowed.
The pipes are delivered without heat treatment, as it results from the process of manufacturing. With the agreement of the parties, the pipes may be delivered in normalized state.
| Diameter (mm) | Thickness (mm) | Weight (kg/m) |
|---|---|---|
| 16 | 1.5 | 0.54 |
| 16 | 1.8 | 0.63 |
| 16 | 2 | 0.69 |
| 17.2 | 1.5 | 0.58 |
| 17.2 | 1.8 | 0.68 |
| 17.2 | 2 | 0.75 |
| 18 | 1.5 | 0.61 |
| 18 | 1.8 | 0.72 |
| 18 | 2 | 0.79 |
| 20 | 1.5 | 0.68 |
| 20 | 1.8 | 0.81 |
| 20 | 2 | 0.89 |
| 20 | 2.3 | 1 |
| 20 | 2.5 | 1.08 |
| 22 | 1.5 | 0.76 |
| 22 | 1.8 | 0.9 |
| 22 | 2 | 0.99 |
| 22 | 2.3 | 1.12 |
| 22 | 2.5 | 1.2 |
| 25 | 1.5 | 0.87 |
| 25 | 1.8 | 1.03 |
| 25 | 2 | 1.13 |
| 25 | 2.3 | 1.29 |
| 25 | 2.5 | 1.39 |
| 26.9 | 1.5 | 0.94 |
| 26.9 | 1.8 | 1.11 |
| 26.9 | 2 | 1.23 |
| 26.9 | 2.3 | 1.39 |
| 26.9 | 2.5 | 1.5 |
| 28 | 1.5 | 0.98 |
| 28 | 1.8 | 1.16 |
| 28 | 2 | 1.28 |
| 28 | 2.3 | 1.46 |
| 28 | 2.5 | 1.57 |
| 30 | 1.5 | 1.05 |
| 30 | 1.8 | 1.25 |
| 30 | 2 | 1.38 |
| 30 | 2.3 | 1.57 |
| 30 | 2.5 | 1.69 |
| 30 | 3 | 2 |
| 32 | 1.5 | 1.13 |
| 32 | 1.8 | 1.34 |
| 32 | 2 | 1.48 |
| 32 | 2.3 | 1.68 |
| 32 | 2.5 | 1.82 |
| 32 | 3 | 2.14 |
| 33.7 | 1.5 | 1.19 |
| 33.7 | 1.8 | 1.42 |
| 33.7 | 2 | 1.56 |
| 33.7 | 2.3 | 1.78 |
| 33.7 | 2.5 | 1.92 |
| 33.7 | 3 | 2.27 |
| 35 | 1.5 | 1.24 |
| 35 | 1.8 | 1.47 |
| 35 | 2 | 1.63 |
| 35 | 2.3 | 1.85 |
| 35 | 2.5 | 2 |
| 35 | 3 | 2.37 |
| 35 | 1.5 | 1.24 |
| 38 | 1.8 | 1.61 |
| 38 | 2 | 1.77 |
| 38 | 2.3 | 2.02 |
| 38 | 2.5 | 2.19 |
| 38 | 3 | 2.59 |
| 40 | 1.5 | 1.42 |
| 40 | 1.8 | 1.69 |
| 40 | 2 | 1.87 |
| 40 | 2.3 | 2.14 |
| 40 | 2.5 | 2.31 |
| 40 | 3 | 2.74 |
| 42.4 | 1.5 | 1.51 |
| 42.4 | 1.8 | 1.8 |
| 42.4 | 2 | 1.99 |
| 42.4 | 2.3 | 2.27 |
| 42.4 | 2.5 | 2.46 |
| 42.4 | 3 | 2.91 |
| 42.4 | 3.6 | 3.44 |
| 42.4 | 4 | 3.79 |
| 48.3 | 1.5 | 1.73 |
| 48.3 | 1.8 | 2.06 |
| 48.3 | 2 | 2.28 |
| 48.3 | 2.3 | 2.61 |
| 48.3 | 2.5 | 2.82 |
| 48.3 | 3 | 3.35 |
| 48.3 | 3.6 | 3.97 |
| 48.3 | 4 | 4.37 |
| 57 | 1.5 | 2.05 |
| 57 | 1.8 | 2.45 |
| 57 | 2 | 2.71 |
| 57 | 2.3 | 3.1 |
| 57 | 2.5 | 3.36 |
| 57 | 3 | 3.99 |
| 57 | 3.6 | 4.74 |
| 57 | 4 | 5.23 |
| 60.3 | 1.5 | 2.17 |
| 60.3 | 1.8 | 2.6 |
| 60.3 | 2 | 2.87 |
| 60.3 | 2.3 | 3.29 |
| 60.3 | 2.5 | 3.56 |
| 60.3 | 3 | 4.24 |
| 60.3 | 3.6 | 5.03 |
| 60.3 | 4 | 5.55 |
| 76.1 | 1.5 | 2.76 |
| 76.1 | 1.8 | 3.3 |
| 76.1 | 2 | 3.65 |
| 76.1 | 2.3 | 4.18 |
| 76.1 | 2.5 | 4.54 |
| 76.1 | 3 | 5.41 |
| 76.1 | 3.6 | 6.43 |
| 76.1 | 4 | 7.11 |
| 88.9 | 1.5 | 3.23 |
| 88.9 | 1.8 | 3.86 |
| 88.9 | 2 | 4.28 |
| 88.9 | 2.3 | 4.91 |
| 88.9 | 2.5 | 5.32 |
| 88.9 | 3 | 6.35 |
| 88.9 | 3.6 | 7.57 |
| 88.9 | 4 | 8.37 |
| 101.6 | 1.5 | 3.7 |
| 101.6 | 1.8 | 4.43 |
| 101.6 | 2 | 4.91 |
| 101.6 | 2.3 | 5.63 |
| 101.6 | 2.5 | 6.11 |
| 101.6 | 3 | 7.29 |
| 101.6 | 3.6 | 8.7 |
| 101.6 | 4 | 9.62 |
| 108 | 1.5 | 3.94 |
| 108 | 1.8 | 4.71 |
| 108 | 2 | 5.23 |
| 108 | 2.3 | 5.99 |
| 108 | 2.5 | 6.5 |
| 108 | 3 | 7.76 |
| 108 | 3.6 | 9.26 |
| 108 | 4 | 10.3 |
| 114.3 | 1.5 | 4.17 |
| 114.3 | 1.8 | 4.99 |
| 114.3 | 2 | 5.54 |
| 114.3 | 2.3 | 6.35 |
| 114.3 | 2.5 | 6.89 |
| 114.3 | 3 | 8.23 |
| 114.3 | 3.6 | 9.82 |
| 114.3 | 4 | 10.9 |
| Standard | Sate | Thickness | Rm N/mm2 | Rp 0,2 | A5 (%) |
|---|---|---|---|---|---|
| SR EN 10255 | S235JR | <16 | 360-510 | 235 | 26 |
| 16-40 | 360-510 | 225 | 26 | ||
| 40-63 | 360-510 | 215 | 25 | ||
| 63-80 | 360-510 | 215 | 24 | ||
| 80-100 | 360-510 | 215 | 24 | ||
| 100-150 | 350-500 | 195 | 22 | ||
| 150-200 | 340-490 | 185 | 21 | ||
| 200-250 | 340-490 | 175 | 21 |
| S235JRH | C | Mn | P | S | N | Cu | CEV |
|---|---|---|---|---|---|---|---|
| max 20 | max 1.4 | max 0.04 | max 0.04 | max 0.012 | max 0.55 | max 0.38 |
The standard size at which these steel profiles are delivered is 6000 mm.
In the case of sheets you can buy whole pieces!
